Read the model code and cleaning chapter first
Find the model on the appliance and obtain its instruction book. Separate exterior cleaning, filter care and mineral-deposit removal; they can use different tools and liquids. The cited Breville Crystal Clear BKE595 book is the US/Canada edition. Use your own market's manual if your appliance differs. [1]
Smeg's official maintenance page also separates care by model, including different quantities for KLF03/KLF04 and KLF05. This is a practical reason to avoid a universal online vinegar recipe. Write the model and approved method beside your supplies before pouring anything into the kettle. [2]
Inspect deposits without scraping the heating area
With the kettle unplugged and cool, inspect the inside and the removable filter. Photograph deposits if you want to compare afterwards. Do not assume every mark is a defect or start scraping with a knife; distinguish removable scale from a damaged surface or an unexplained change requiring support.
Breville's BKE595 manual describes mineral deposits from tap water and permits a proprietary kettle descaler. Smeg advises checking the inner base and descaling when scale appears. Choose an approved product and follow its quantity instructions, keeping those instructions separate from any alternative vinegar method. [1] [2]
Use the exact alternative method only for a matching kettle
For the cited BKE595, the manual's vinegar alternative fills the kettle to two-thirds with one part vinegar and two parts water, then boils the mixture and leaves it overnight. These ratios and timing belong to that manual. Do not substitute concentrated cleaning acid or assume a different kettle permits boiling the mixture. [1]
Measure the permitted mixture and respect the kettle's capacity. Keep the vessel stable and hot liquid away from children and pets. If using a commercial descaler instead, follow the applicable manual and descaler's label together; do not combine several methods, detergent or bleach to make the treatment stronger.
Reserve enough time to complete rinsing
After the BKE595 overnight treatment, the manual says to empty the solution, fill with clean water, boil and discard that water, then repeat. Treat these fresh-water cycles as part of the procedure. Mark the kettle as being cleaned so another household member does not use its contents for a drink. [1]
Follow your own model's complete rinse sequence if it differs. Do not use taste as a check that a cleaning solution has been removed. If deposits remain, review the approved next step or contact support rather than increasing the chemical concentration or leaving an arbitrary stronger solution inside.
Care for electrical parts and filter separately
The BKE595 manual warns against immersing the kettle base, switch area, power base, cord or plug, and against allowing moisture to contact them. It also says not to remove the internal diffuser ring. For exterior care it specifies a damp cloth and a soft dry cloth; abrasive cleaners are unsuitable. [1]
Check the filter for damage and refit it correctly before normal use, following the model's instructions. Finish with the kettle clean and dry, record the treatment date, and inspect again during use. Repeated electrical cut-outs, leaks or damaged connectors call for service rather than another improvised descaling session.